HONDA 2009 Odyssey - Manual (Page 257)

If you are
traveling far from home and can no
longer receive your preset stations,
you can use the auto select feature to
find stations in the local area.
Press the A. SEL button. ‘‘A. SEL’’
appears in the display, and the
system goes into scan mode for
several seconds. It stores the
frequencies of six AM and twelve
FM stations in the preset buttons.
You will see a ‘‘0’’ displayed after
pressing a preset button if auto
select cannot find a strong station for
that preset button.
If you do not like the stations auto
select has stored, you can store
other frequencies on the preset
buttons (icons) as previously
described.
press the
A.SEL button or touch the AUTO
SELECT icon. This restores the
presets you originally set.
For information on AM/FM radio
frequencies and reception, see page
.
Press the SOUND (TUNE) knob
repeatedly to display the bass, treble,
balance, and fader settings.
Use the TRE/BAS
modes to adjust the tone to your
liking.
These two
modes adjust the strength of the
sound coming from each speaker.
BAL adjusts the side-to-side strength,
while FAD adjusts the front-to-back
strength.
Each mode is shown in the display as
it changes. Turn the SOUND
(TUNE) knob to adjust the setting to
your liking. When the level reaches
the center, you will see ‘‘C’’ in the
display. The system will
automatically return the display to
the selected audio mode about 5
seconds after you stop adjusting a
mode.
275
To turn off auto select,
Playing the AM/FM Radio (Models with navigation system)
AUTO SELECT Adjusting the Sound
Treble/Bass
Balance/Fader
254
2009 Odyssey
Table Of Contents Main Menu