HONDA 2008 Ridgeline - Manual (Page 269)

CONTINUED
Disconnect the blade assembly
from the wiper arm by pushing in
the lock tab. Hold the lock tab in
while you push the blade assembly
toward the base of the arm. Remove the blade from its holder
by grabbing the tabbed end of the
blade. Pull up firmly until the tabs
come out of the holder. Examine the new wiper blades. If
they have no plastic or metal
reinforcement along the back
edge, remove the metal
reinforcement strips from the old
wiper blade, and install them in
the slots along the edge of the new
blade. 3. 4. 5.
Wiper Blades
Ma
int
e
na
nce
265
LOCK TAB
BLADE BLADE
REINFORCEMENT
2008 Ridgeline
Table Of Contents Main Menu