Changing a flat tire, 2012 crosstour – HONDA 2012 Accord Crosstour User Manual
Page 379
Advertising
CONTINUED
Place the jack under the jacking
point nearest the tire you need to
change. Turn the end bracket
clockwise until the top of the jack
contacts the jacking point. Make
sure the jacking point tab is
resting in the jack notch.
Loosen each wheel nut 1/2 turn
with the wheel nut wrench.
To reinstall the spare tire holder,
slide the hook, lift up the spare
tire holder and attach it to the
hook. Attach the longer section of
the wrench to the spare tire
holder shaft. Turn the wrench
clockwise. Then attach the short
end of the wrench to the shaft,
and tighten it securely.
Reinstall the plastic cover.
11.
10.
12.
13.
Changing a Flat Tire
375
WHEEL NUT
JACKING POINTS
T
a
k
ing
Ca
re
of
th
e
U
ne
x
p
e
c
te
d
2012 Crosstour
Advertising