HONDA 2012 Accord Crosstour - Manual (Page 99)

To remove a head restraint for
cleaning or repair, pull it up as far as
it will go. Push the release button,
then pull the restraint out of the seat-
back.
When a passenger is seated in the
rear seat, the head restraint should
be adjusted up or down, to match the
passenger’s height.
When removing the rear outer head
restraints, tilt the rear seat first (see
page
).
Make sure the head restraint locks
in position when you reinstall it.
When reinstalling a head restraint,
put the legs back in place. Then
adjust it to the appropriate height
while pressing the release button.
97
CONTINUED
Removing the Head Restraint
Seats
95
CUSHION
LEGS
RELEASE
BUTTON
SEAT-BACK
Rear
Failure to reinstall, or correctly
reinstall, the head restraints can
result in severe injury during a
crash.
Always replace the head
restraints before driving.
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
2012 Crosstour