JVC KS-BTA200 - Manual (Page 17)

15 Connection
To connect a special device
Some Bluetooth devices require some special
procedures to establish Bluetooth connection for the
first time. You need to select the device name for those
Bluetooth devices before you register it.
for Type A
1
Display “Bluetooth Phone” screen
or select “Bluetooth Audio” as the
source.
2
Press
5/∞ to select “New device.”
3
Display the menu, then select “Mode”
] “Special Device.”
The list of special devices appears on the display.
4
Select a device name you want to
connect.
5
Connect the selected device using
“Open (page 12)”or “Search (page
14).”
for Type B
1
While “Bluetooth Phone” or
“Bluetooth Audio” is selected as
the source, select “New device.”
2
Display the menu, then select
“Bluetooth”
] “Special
Device.”
The list of special devices appears on the display.
3
Select a device name you want to
connect.
4
Connect the selected device using
“Open (page 13)”or “Search (page
14).”
4
Use the following buttons to enter the
PIN (Personal Identification Number)
Code of the device to be connected.
4/¢: Move the entry position.
5/∞:
Select a number.
5: Delete all entries.
1: Enter the number.
“Connected (and the device name)” appears
on the display.
for Type D
1
While “Bluetooth Phone” or
“Bluetooth Audio” is selected as
the source, press
4/¢ to select
“NEW.”
2
Press
∞, then select “SEARCH.”
The unit searches for the devices and displays the
list of the available devices.
3
Select a device name you want to
connect.
4
Use the following buttons to enter the
PIN (Personal Identification Number)
Code of the device to be connected.
4/¢: Move the entry position.
VOLUME +/– (Control dial):
Select a number.
∞:
Enter the number.
“CONNECT (and the device name)” appears
on the display.
KS-BTA200_book.indb 15 KS-BTA200_book.indb 15 06.12.21 5:07:47 PM 06.12.21 5:07:47 PM