Setting ipod control mode – JVC KW-AV50 User Manual
Page 29
For some iPod/iPhone models, the performance
may be abnormal or unstable during operation. In
this case, disconnect the iPod/iPhone device, then
check its condition.
If the performance is not improved or slow, reset
your iPod/iPhone.
29
ENGLISH
Setting iPod control mode
Select the unit controlling iPod/iPhone playback.
When the source is “iPod”...
1
2
Head
Controls playback from this unit.
iPod
Controls audio/video playback from
the iPod/iPhone.
• Playback information is shown.
External Allows any audio/video signals
from iPod/iPhone.
• No information is shown.
• When you turn on the power
and play back a video with
<External> selected, caution
message appears. Press [Accept]
to continue.
• When using iPod nano (1st Generation) or iPod with
video (5th Generation) with <AV-IN> selected for
<Audio Input> (☞ page 42 ), only <Head> mode
is available. <iPod> and <External> are not
selectable.
• When you use App of the iPod touch or iPhone, see
also page 54 for safety instructions.
Selecting preference settings
for iPod/iPhone playback
When the source is “iPod”...
1
2
Audiobooks
Select the speed of audio books.
Artwork
Shows/hides the iPod artwork.
Notice:
When operating an iPod/iPhone, some operations
may not be performed correctly or as intended. In
this case, visit the following JVC web site: <http://
www.jvc.jp/english/car/> (English website only)
EN_KW-AV50E.indb 29
EN_KW-AV50E.indb 29
11/09/07 14:44
11/09/07 14:44