Replacing the lamp, Procedure for lamp replacement, Lamp cover – JVC DLA-HD750 User Manual

Page 48: P48 to 50, Remove the lamp cover, Loosen the screws on the lamp unit, Pull out the lamp unit

Advertising
background image

5

Troubleshooting

48

Replacing the Lamp

The lamp is a consumable item. If the image is dark or the lamp is turned off, replace the lamp unit.

When the lamp replacement time approaches, a message is displayed on the screen and the condition is indicated by the

indicator. (

P47)

Remove the lamp cover

Remove the screws with a screwdriver.

Usable Lamp Life

The usable lamp life for this unit is

approximately 2000 hours. The

usable lamp life of 2000 hours is

merely the average usable life of

lamps and we do not provide any

guarantee for this figure.

The lamp life may not reach

2000 hours depending on the

operating conditions.

When the lamp has reached the

end of its usable life, deterioration

progresses rapidly.

If the image is dark or the color tone

is abnormal, replace the lamp unit

as soon as possible.

Setting

Lamp Power

to

Standard

will help to prolong the lamp life.

Purchasing the Lamp Unit

Loosen the screws on the lamp unit

Loosen the screws with a screwdriver.

Please consult your authorized dealer.

Lamp Unit

Part No.: BHL5010-S

Pull out the lamp unit

Grasp the handle and pull out the lamp unit.

Procedure for Lamp Replacement

MEMO

CAUTION

Pull the power plug from the power

outlet. Failure to do so may cause

injuries or electric shocks.

Do not replace the lamp immediately

after the unit has been used, and

allow a cooling period of 1 hour

or more before replacement. The

temperature of the lamp is still high

and this may cause a burn.

Do not apply shock to the lamp unit.

It may cause lamp blowout.

Do not use flammable air duster to

clean the internal parts of the unit.

This may cause fire.

1

2

3

Handle

Advertising