JVC DLA-X90 - Manual (Page 79)

79
M
ain
te
na
nc
e
ENGLISH
Install the new lamp unit
Tighten the screws of the new lamp
unit
Attach the lamp cover
CAUTION
● Use only genuine replacement
parts for the lamp unit. Also,
never attempt to reuse an old
lamp unit. This may cause a
malfunction.
● Do not touch the surface of a
new lamp. This may shorten
the lamp life and cause lamp
blowout.
MEMO
After Replacing the Lamp
● Do not place the removed
lamp unit at locations that is
reachable by children or near
combustible items.
● Dispose used lamp units in
the same way as fluorescent
lamps. Follow your local
community rules for disposal.
5
6
● Tighten the screws with a screwdriver.
● Insert the top part (with 2 claws) of the lamp cover into
the unit.
● Fasten the screws with a screwdriver.
7
Handle