Usb operations, Playing a usb device, Connecting a usb device – JVC KW-AV50 User Manual

Page 26

Advertising
background image

26

ENGLISH

• This unit can play JPEG/MPEG1/MPEG2 */MP3/WMA/

WAV files stored in USB mass storage class device.

• This unit can recognize a total of 5 000 files and 250

folders (a maximum of 999 files per folder).

• Make sure all important data has been backed up to

avoid losing the data.

* Except for MPEG2 files recorded by JVC Everio

camcorder (extension code <.mod>).

Connecting a USB device

You can connect a USB mass storage class device such as
a USB memory, Digital Audio Player etc. to the unit.
• You cannot connect a computer or portable HDD to

the USB cable from the rear of the unit.

USB cable from the
rear of the unit

The source changes to “USB” and playback starts.
• All tracks in the USB device will be played repeatedly

until you change the source.

Cautions:

• This unit may not play back files in a USB device

properly when using a USB extension cord.

• USB devices equipped with special functions such as

data security functions cannot be used with the unit.

• Do not use a USB device with 2 or more partitions.
• Depending on the shape of the USB devices and

connection ports, some USB devices may not be
attached properly or the connection might be loose.

• This unit cannot recognize a USB device whose rating

is other than 5 V and exceeds 1 A.

• This unit may not recognize a memory card inserted

into the USB card reader.

• Connect only one USB device to the unit at a time. Do

not use a USB hub.

• When connecting with a USB cable, use the USB 2.0

cable.

• The maximum number of characters for (when the

characters are 1 byte):

– Folder names : 50 characters
– File names : 50 characters
• Avoid using the USB device if it might effect driving

safety.

• Do not pull out and attach the USB device repeatedly

while “Now Reading” is shown on the screen.

• Electrostatic shock at connecting a USB device may

cause abnormal playback of the device. In this case,
disconnect the USB device then reset this unit and
the USB device.

• Operation and power supply may not work as

intended for some USB devices.

• Do not leave a USB device in the car, expose to direct

sunlight, or high temperature to avoid deformation
or cause damaging to the device.

Playing a USB device

USB operations

EN_KW-AV50EU.indb 26

EN_KW-AV50EU.indb 26

11/09/16 14:20

11/09/16 14:20

Advertising