JVC KW-AV50 - Manual (Page 48)

48
ENGLISH
Operations on a Bluetooth device (using JVC KS-BTA100,
separately purchased)
For Bluetooth operations, it is required to connect the Bluetooth adapter, KS-BTA100 (separately purchased) to the
LINE IN terminals on the rear of the unit. (☞ the Installation/Connection Manual)
• KS-BTA100 is not available in some countries. Please contact your dealer where you purchased this unit.
• For details, refer also to the instructions supplied with the Bluetooth adapter and the Bluetooth device.
• Operations may be different according to the connected device.
Caution
When JVC KS-U30 and JVC KS-BTA100 are connected at the same time, videos of iPod with video (5th
Generation) cannot be played.
Preparation
1 Register (pair) a Bluetooth device with KS-BTA100.
• Refer to the instructions manual supplied with KS-BTA100.
2 Select <BT> for <Audio Input> setting. (☞ page 44)
• “Bluetooth” is selectable as the source on <AV Menu>.
Using the Bluetooth audio player
1 Select “Bluetooth” as the source. (☞ page 13)
Starts playback/pauses.
• If playback does not start, operate the Bluetooth audio player to
start playback.
• Selects track. (Press)
• Fast-forwards or reverses the track. (Hold)
KS-BTA100
BLUETOOTH OPERATIONS
EN_KW-AV50EU.indb 48 EN_KW-AV50EU.indb 48 11/09/16 14:20 11/09/16 14:20