Plantronics Savi W440-M - Manual (Page 13)

Plantronics Savi User Guide 13
Conferencing Up to Three Guest Headsets
While on a call, you can subscribe up to three guest headsets to
your USB adapter for conferencing. As you add headsets to the
adapter, an additional headset icon will appear in the Plantronics
Control Panel with a number from 1 to 3 indicating the number of
guest headsets subscribed to the adapter.
Guests may conference in as described below:
1 While you are on a call, place the guest’s headset into
subscription mode.
2 Short press (less than one second) the subscription button on
the USB adapter. The USB adapter light will flash yellow and
green.
3 The USB adapter light will then turn solid yellow and you will
hear a tone in the master headset indicating a guest wishes to
join the call.
4 If you press the call control button on the master headset
within five seconds, the guest is joined to the call.
If you do not press the call control button within five seconds,
the request to join the call is rejected and the guest will hear an
error tone in their headset.
5 Guests may leave the conference call by pressing their call
control button.
When they do you will hear a single tone in the master headset
as each guest leaves the call.
To see how many headsets are subscribed to the adapter, refer
to the lower left-hand corner of the Plantronics Control Panel.
The first headset is the master headset and the number inside
the next headset is the number of guest headsets subscribed to
the adapter. The examples below show 1, then 2, then 3 guest
headsets subscribed to the adapter in addition to the master
headset.
1 2 3