Plantronics Audio 1100M - Manual (Page 6)

Plantronics .Audio 1100M USB Handset User Guide 6
Speakerphone Activation
1 Press the speakerphone key.The audio functions will be
transferred to the computer speakers and microphone or
whichever device you have set as the default within Microsoft
Office Communicator.
2 Press the speakerphone key again and the audio
functions will be transferred back to the 1100M
.
NOTe If you would like to adjust the default device settings in
Microsoft Office Communicator please refer to the quick help
guide at
www.plantronics.com/ucassistance.
Using the Monitor Clip
1 Using the fastening material provided, attach the monitor clip
to your computer monitor as shown below.
2 Placed the handset into the clip.
Answering and ending a Call
1 To answer a call press the green Call/Answer Function
Key.
2 To end a call press the red Call end Function Key.
Answering a Call During an Active Call
1 To answer an incoming call while engaged in an
active call, press the red call end function key. This will
disconnect the current call and allow the incoming call to ring.
OR
2 You can place the first call on hold in Microsoft Office
Communicator and answer the second call either in
Microsoft Office Communicator or by pressing the green
call/answer button. You can manage/resume calls with the
hold function as usual within Microsoft Office Communicator.
Muting the Microphone
1 To mute the microphone during a call, press the mute
key. An LED will indicate the microphone is muted.
2 To unmute the microphone, press the mute key again.
The LED will turn off.
Adjusting Incoming Volume
To increase or decrease the incoming volume press the + or –
buttons on the side of the 1100M.
Ringer Adjustment
To adjust the ringer volume or turn ringer off, use the ringer control
switch on the side of the 1100M. In the event a call is received
and the ringer control switch is “off”, the visual ringer will indicate
an incoming call