Charge your headset and spare battery, Charge your headset, Charge your spare battery – Plantronics Savi W745 User Manual
Page 12
1
Align the charging cradle pins with the base and press firmly until the cradle rests evenly on the
base.
2
Plug one end of power supply into power jack on back of the base and other end into working
power outlet.
3
Place the headset in the charging cradle. The headset and battery charging LEDs flash green
when charging the headset and battery. The charging LEDs turn solid green, independently of
each other, when the respective headset or battery is fully charged. Charge for at least 20
minutes prior to the first use. A full charge takes 3 hours.
1
Headset charging LED
2
Spare battery charging LED
NOTE
This product has a replaceable battery. Only use the battery type supplied by Plantronics.
The spare headset battery is shipped in the battery compartment on the side of the charging
cradle.
The spare battery charges when the power supply is plugged into a working power outlet and
the charging cradle is connected to the base; the battery charging LED flashes green when
charging the spare battery and turns solid green when the spare battery is fully charged.
NOTE
The headset does not need to be docked for the spare battery to charge; the spare battery
charges regardless of the headset status.
To replace your headset battery, see
Charge your headset and spare battery
Charge your headset
Charge your spare
battery
12