Plantronics Voyager 520 - Manual (Page 13)

1 Plantronics Voyager 520
muLTiPOiNT
Plantronics Voyager 520 supports multipoint technology, which allows you
to switch between two different Bluetooth audio devices. This enables you
to use one headset between two different phones.
PaIr aNOTHEr Bluetooth dEvICE
Repeat the pairing steps with the new device. See “Subsequent Pairing”
on page 7 for instructions.
INITIaTE a CaLL
The headset initiates a call on the device you most recently used. To use
the second phone, initiate the call using the controls on the second phone.
The second phone forms a link with the headset.
aNSwEr a CaLL
An incoming call from either phone rings through to your headset.
To answer a call, press the call control button.
aNSwEr a CaLL wHILE TaLkING ON THE OTHEr dEvICE
To answer the second call, the first call must be terminated. There is no
function for placing one call on hold while answering another call from
the headset.
Press the call control button once to hang up the existing call, and then press
the call control button again to answer the new call from the other phone.
Wait for the beep and then answer the second call by pressing the call control
button again.
If you choose not to answer the second call, and you have voice mail on
the second device, the call will go to voice mail.
•
•
•
EN
E
N
G
LI
S
H