Candy HOLIDAY 1000 - Manual (Page 21)

CREASE GUARD BUTTON
The Crease Guard function minimizes creases as much as
possible with a uniquely designed anti-crease system that is
tailored to specific fabrics.
MIXED FABRICS - the water is gradually cooled throughout the
final two rinses with no spinning and then a delicate spin
assures the maximum relaxation of the fabrics.
DELICATE FABRICS – final two rinses with no spinning and then
the fabrics are left in water until it is time to unload. When you
are ready to unload, press the Crease Guard button – this will
drain and spin ready for emptying
RESISTANT FABRICS AND WOOLLENS - after the final rinse, the
fabrics are left in water until it is time to unload. When you are
ready to unload, press the Crease Guard button – this will drain
and spin ready for emptying
If you do not want to spin the clothes and activate drain only:
- Turn the appliance off by pressing the on / off button
- Select Programme Z
- Switch on the appliance again by pressing the on / off button
NO SPIN BUTTON
By pressing this button it is possible to eliminate the spin-drying
on all programmes. This operation is suitable for programmes
at 90°C and at 60°C in case of special treated fabrics
(cottonova or permanent press) or for mixed delicate fabrics.
WASH TEMPERATURE CONTROL KNOB
ROTATES IN BOTH DIRECTIONS
With this device it is possible to reduce, but no increase
washing cycle temperature.
The table of programmes indicate the maximum temperature
advised for each type of wash.
WARNING: THIS TEMPERATURE MUST NEVER BE
EXCEEDED
TIMER KNOB FOR WASH PROGRAMMES
IMPORTANT:
ALWAYS ROTATE THE KNOB IN A CLOCKWISE
DIRECTION, NEVER IN AN ANTI-CLOCKWISE
DIRECTION. DO NOT PRESS THE “ON” BUTTON (C)
BEFORE SELECTING THE PROGRAMME
The tables describe the washing programme on the basis of
the number or symbol chosen.
IMPORTANT : IF YOU NEED TO CHANGE A
PROGRAMME THAT HAS ALREADY STARTED – SWITCH
OFF THE MACHINE BY THE ON / OFF BUTTON AND THEN
MOVE THE PROGRAMME DIAL TO THE CORRECT
POSITION. IF YOU DO NOT PRESS “OFF” BEFOREHAND,
THE DIAL WILL AUTOMATICALLY MOVE TO ITS INITIAL
POSITION.
ON/OFF INDICATOR LIGHT
EN
40
EN
41
F
I
L
N
OK
T ° C
E