Candy PCV 604 C - Manual (Page 15)

he hob part of the product is controlled via the on the control panel (Figure 3).
Stage "0" means off position
.
The remaining 6 stages indicate the following types of use:
1.........Heat Maintenance Position
2 - 3....Heating in Low Temperature
Position
4-5-6...Cooking, Frying and Boiling
Position
The upper part of the Solid hotplate is covered with a heat-resistant protective material.
At first run, in order to harden the protective layer by burning it, bring the electric burner button
to position "3" and run the burner for 5 minutes. While using the electric burners, attention
should be paid that the pots used have smooth even bottoms. You can obtain maximum
performance from your hob if you use pots with suitable diameters and even bottoms. Using
pots with small diameters on burners with large diameters is not recommended. Because that
will cause heat loss and lead to a waste of energy.
CORRECT WRONG
pot bottom is round pot buttom is small pot buttom does not s it well
Figure3
1
2
3 4
5
6
Burner
control knob
mperature is very high.
eating unit is run, you
hnical structure of the
ots should rub against
come damaged. It is
Resistance of the vitroceramic glass to heat and extreme changes of te
A redness will be noticed on the heated surface with time. When any h
may hear a weak sound; this is normal and it has to do with the tec
system.
It does not pose any problems in terms of quality. In case sharp-edged p
or roughly placed on the vitroceramic glass, the surface may be
recommended that you pay attention to this.
13
ENG
4.2 USING THE COOKTOP BURNERS:
7-stage knob
WRONG WRONG
T
s