Candy PCV 604 C - Manual (Page 22)

Scrubbing with steel cleaning wires may harm the vitroceramic glass surface. Formations of dust
on thesurface shouldbe cleanedup using a dampened cloth .
Changes in colourwhich might occur on the ceramic glass surface do not affect the functional structure
or permanence of the vitroceramic. The reason for the changes in colour is not the change in the
material; it may be because the burnt residues on the surface are not cleaned up or the pots used
have worn the glass surface or because unsuitable cleaning materials were used .
The cleaning spatula should always be used priortochemical cleaning substances. With this spatula,
youcan clean up the tiniest of dirts on the vitroceramic surface . Dirts that aredifficult to remove , such
as melted plastic, heavy oils, sweet substances, can be removed easily with the spatula. As the
spatula includes a razor, it is dangerous and must be kept out of reach of children
Duringcleaning with the spatula, pay attention not toscrape off the sillicon adhesives found on the sides
of the glass.
It is recommendedthat you leave this operationtotheAuthorisedService.
Unplugthe oven first and make sure that it is cold. After removing thelidinfront of the light, take the
bulbout. Insert the new bulbresistant to 300 0 C, whichyou find atAuthorised Services, into the
place of the bulb you have removed. Thenfit the light protecting back into its place. After that, your
oven will be ready foruse.
20
ENG
5.5 MAINTENANCE
Replacing the Oven Light Bulb
lid
.
will