60° c 5 kg max, Customer awareness, Washing – Candy CBE 1025 TS5 ES User Manual

Page 13: Consejos útiles para el usuario, Lavado

Advertising
background image

EN

Pour the bleach into the
special compartment and set
the knob (L) on the special
programme “PRE-WASH STAIN
REMOVAL”

.

When this phase has
terminated add the rest of the
washing and proceed with a
normal wash on the most
suitable programme.It is
advisable not to wash a load
made up entirely of articles in
towelling fabric which absorb a
lot of water and become too
heavy.

The maximum load for heavy
fabrics is 5 kg, while, in the case
of delicate fabrics, it is
advisable not to exceed 2 kg
(1 kg in the case of machine
washable articles in “Machine
Washable Woolens”) so as to
avoid the formation of creases
which may be difficult to iron. A
net bag should be used for
particularly delicate fabrics.

EXAMPLE:
The advice of Candy is set out
in the washing programme
table:

● Ensure that article labels

carry the indication 60°C.

● Open the door by pressing

button (B).

● Load the drum with a

maximum of 5 kg of dry
washing.

● Close the door

IMPORTANT:
WHEN SETTING THE
PROGRAMME ENSURE
THAT THE ON/OFF BUTTON
IS NOT TURNED ON.

Select programme 2:
Choose the programme by
rotating the knob (L) in a
CLOCKWISE DIRECTION and
make the number of the
programme coincide with the
sign.

● Move the temperature knob

(I) to maximum 60° C.

● Open the detergent drawer

(A).

25

60° C

5 kg MAX

24

EN

CHAPTER 11

CUSTOMER
AWARENESS

A guide environmentally friendly
and economic use of your
appliance.

MAXIMISE THE LOAD SIZE
Achieve the best use of energy,
water, detergent and time by
using the recommended
maximum load size.
Save up to 50% energy by
washing a full load instead of 2
half loads.

DO YOU NEED TO PRE-WASH?
For heavily soiled laundry only!
SAVE detergent, time, water and
between 5 to 15% energy
consumption by NOT selecting
Prewash for slight to normally
soiled laundry.

IS A HOT WASH REQUIRED?
Pretreat stains with stain
remover or soak dried in stains in
water before washing to reduce
the necessity of a hot wash
programme.
Save up to 50% energy by using
a 60°C wash programme.

WASHING

VARIABLE CAPACITY

This washing machine
automatically adapts the level of
the water to the type and quantity
of washing. In this way it is also
possible to obtain a “personalized”
wash from an energy saving point
of view.
This system gives a decrease in
energy consumption and a
sensible reduction in washing
times.

Let us suppose that the washing
consists of HEAVILY SOILED COTTON
(tough stains should be removed
with suitable stain removal). When
only a limited number of articles
have stains which require
treatment with liquid bleaching
agents, preliminary removal of
stains can be carried out in the
washing machine.

OK

cl

cl

ES

Eche el blanqueador en el
compartimento
correspondiente de la cubeta
del detergente y posicione el
selector (L) en el programa
especial “ELIMINACION DE
MANCHAS PRELAVADO”

.

Finalizado este tratamiento
agregue a las prendas
blanqueadas el resto de la ropa
y proceda al lavado normal con
el programa más adecuado.

Le aconsejamos no realizar una
colada con sólo prendas de
tejidos esponjosos, ya que al
absorber mucha agua, sehacen
demasiado pesadas.La carga
admitida para los tejidos
resistentes es de 5 kg mientras
que en el caso de tejidos
delicados se aconseja no
superar los 2 kg (1 kg en el caso
de prendas de “Pura Lana
Virgen” lavables en lavadora),
para evitar la formación de
arrugas difìciles de planchar.
Para tejidos delicados se
aconseja el uso de una bolsa de
rejilla.

EJEMPLO:
Mire la tabla de los programas
de lavado, verá como Candy le
aconseja sobre el modo de
operar:

● Asegúrese que en las

etiquetas de las prendas esté
indicado “60° C”.

● Abra el ojo de buey con el

botón (B).

● Cargue el tambor con 5 kg

como máximo de ropa en seco.

● Cierre el ojo de buey.

ATENCIÓN:
AL SELECCIONAR EL
PROGRAMA, ASEGURESE
DE QUE EL BOTÓN DE
PUESTA EN
MARCHA/PARO NO
ESTÁ APRETADO.

Seleccione el programa 2: el
programa se selecciona
haciendo girar el mando (L) en
el SENTIDO DE LAS MANECILLAS
DEL RELOJ y haciendo coincidir
el número del programa con el
indicator.

● Gire el mando de la

temperatura (I) hasta 60°C
como máximo.

● Abra la cubeta del

detergente (A).

ES

CAPÍTULO 11

CONSEJOS ÚTILES
PARA EL USUARIO

Breves sugerencias para la
utilización del electrodoméstico en
el respeto del medio ambiente y
con el máximo ahorro.

CARGAR AL MÁXIMO LA LAVADORA
Para eliminar eventuales despilfarros
de energía, agua o detergente, se
recomienda utilizar la máxima
capacidad de carga de la
lavadora. Es posible, ahorrar hasta el
50% de energía con una carga
llena efectuada en una única
colada, respecto a dos coladas a
1/2 carga.

CUANDO SIRVE REALMENTE EL
PRELAVADO?
Solamente para cargas
particularmente sucias!
Se ahorra del 5 al 15% de energía
evitando la selección de la opción
del prelavado para ropa de
suciedad normal.

QUÉ TEMPERATURA DE LAVADO
SELECCIONAR?
La utilización de productos para
eliminar manchas antes del lavado
en la lavadora, reduce la
necesidad de lavar a temperaturas
superiores a 60°C. Es posible ahorrar
hasta un 50% utilizando una
temperatura de lavado de 60°C.

LAVADO

CAPACIDA VARIABILE

Esta lavadora adapta
automáticamente el nivel del agua
al tipo y cantidad de ropa.Así pues,
es posible obtener una colada
“personalizada”, incluso desde el
punto de vista energético.
Este sistema aporta una
disminución del consumo de
energía y una sensible reducción
del tiempo de lavado.

Supongamos que la colada que va
a hacer sea de ALGODON MUY
SUCIO (si hay manchas
especialmente resistentes, quítelas
con la pasta apropiada).
Cuando son sólo algunas prendas
las que presentan manchas que
requieren un tratamiento con
productos blanqueadores líquidos,
se puede proceder a una
eliminación de manchas previa en
la lavadora.

Advertising