Selecting the programme and special functions – Candy CD 801 T User Manual

Page 7

Advertising
background image

13

Attention
This dishwasher is equipped with an anti-overflow safety device which
works even when power is off, and if the water level is too high, the
supply will automatically be closed off.
Important
To ensure the correct operation of the anti-overflow safety device, it is
recommended not to move or to tilt the dishwasher during operation.
if it is necessary to move or to tilt the dishwasher, first make sure the
washing cycle is finished and that no water is left in the tank.

Setting a programme
Press the button; the last programme selected will appear on the
display.
To set a new programme, press the “Programme Selection Button”

"P"

.

When the required programme is shown in the display, press the
"START" button. The time of the selected programme (in hours and
minutes) will start to flash in the display.
After an audible signal has sounded (if it has not been deactivated) the
programme will start automatically.

“Half & Half” Button
To ensure that your dishwasher meets all your requirements, the “Half
& Half”
option button allows you to select:

Half Load Top Basket
By selecting this option Dishes are washed in the top basket
and cutlery in lower basket

Half Load Lower Basket
By selecting this option Dishes are washed in the lower basket only.

Simultaneous Washing
By Selecting this option Dishes are washed in the top and lower basket.
This option reduces washing times in relation to full programme.
(Please note that selecting the (c) option no other option
button can be selected, except for “START”, Programme
Selection and Delay Start buttons.

HPS button (High Pressure System)
Your dishwasher is fitted with a two speed motor. By pressing the HPS
Button, the motor operates at a higher speed which will result in higher
water pressure, to attack the dirt.
The HPS option is particularly suitable for washing pans, pots and
heavily soiled crockery.

Please Note:
This option must be selected before pressing the ''START'' button.

Economy button
The "E" button reduces the temperature of the water during the last rinse,
provides an energy saving of more than 20% and shortens the cycle.
Recommended for evening washes when the dishes are not required
perfectly dry, straight away.

Selecting the programme and special functions

Use in conjunction with programme guide

Pr

I

12

Description of the control

A

On/off button

B

Door handle

C

Digital led display

D

Programme selection button

E

Delay Start button

F

“Half & Half” button

G

HPS button

H

Economy button

I

START programme button

L

Salt level indicator light

M

Rinse aid indicator light

Dimensions:

Height
Depth
Width
Depth with door open

cm
cm
cm
cm

Technical Data

EN 50242 place load
Capacity with pans and dishes
Water supply pressure
Fuse
Power input
Supply voltage

12
8 persons
Min. 0,08 - Max 0,8 MPa
(see rating plate)
(see rating plate)
(see rating plate)

with working top

85
60
60

120

without working top

82

56,3
59,8

117

A

B C D E F G H I

M

L

a)

b)

c)

Advertising