Appendix a - technical specs – M-AUDIO Delta TDIF User Manual

Page 56

Advertising
background image

Appendix A - Technical Specs

Analog Audio

Peak Analog Signal:

+2dBV(consumer setting), -2dBV(-10
setting).

THD:

less than 0.002% @ 0dBFS

Freq. Response:

22Hz-44kHz, -0.4,-0.4dB (96kHz sample
rate)

Dynamic Range (a-weighted): D/A 104.0dB, A/D 100.4dB

Input Impedance:

10k ohms minimum.

Connectors:

Gold-plated RCA female, on break-out
cable.

Digital Audio

TDIF Sample Rate:

8kHz to 48kHz

TDIF I/O Format:

8x8 simultaneous (parallel) input and

output.

TDIF Connector:

DB25 female on PCI board.

S/PDIF Sample Rate:

8kHz to 96kHz.

S/PDIF Input Format:

Coaxial, 0.5V to 5V peak-to-peak.

S/PDIF Output Format:

Coaxial, 0.5V peak-to-peak; also
configurable to output AES/EBU format
data stream at 0.5V peak-to-peak.

S/PDIF Connectors:

Gold-plated RCA female, on break-out
cable.

Word Clock Output Rate:

8kHz to 96kHz.

PCI Adapter Resource Requirements

IRQ:

One required

I/O Addresses:

Four blocks: 32, 16, 16, and 64 bytes

DMA Channels:

None required

56

Advertising