M-AUDIO Delta TDIF - Manual (Page 7)

With your computer turned off:
1. Unwrap the Delta TDIF breakout cable. Locate the 15-pin D-sub
connector on the Delta TDIF PCI Host card.
2. Connect D-sub end of the breakout cable to the 15-pin D-sub
connector on the Delta TDIF PCI Host card that now resides in your
computer.
Delta Driver Software Installation
The Delta TDIF system includes a driver CD for Windows 98/95/NT and
Macintosh, containing all drivers, and Delta Control Panel software. To
install these on your system, please follow these steps:
Windows ME or 98 Installation
1. After installing the Delta TDIF hardware, boot your system and start
Windows. During the Windows boot procedure, new hardware will
be automatically detected by the Add New Hardware Wizard as
shown here. Click ‘Next>’.
2. The ‘Add New Hardware Wizard’ will now ask how you want to find
the driver. "Search for the best driver for your device" is already
selected. Click ‘Next>’.
3. Windows will give you a selection of locations to search. Make sure
that only “Choose a Path” is checked, or click on the check box to do
so. Insert the Driver CD into your CD ROM drive. Type in the drive
letter of your CD drive (we will assume here that it is D:\) and the
path to the Delta drivers for your OS.
7