Remington NE3350 - Manual (Page 9)

ENGLISH
2
EXCHANGING THE ATTACHMENTS
(NE3350)
Ensure that the product is switched off.
Remove the head by turning it clockwise to the unlocked
position and pull off.
Attach the other head by placing it on the top of the unit and
turning it anti-clockwise to lock into position.
TURNING ON THE TRIMMER
The On/Off switch is integrated into the battery cap.
Rotate the battery cap clockwise to turn on.
To turn off, simply rotate the battery cap, anti-clockwise, back
to the off position.
HOW TO USE
TO REMOVE HAIR FROM NOSE
Insert clipper’s cutting unit gently into the nostril.
Gently move the cutting edge in and out of the nostril whilst
gently rotating the clipper.
Avoid inserting the cutting unit more than 6mm into your
nostril.
TO REMOVE HAIR FROM EYEBROWS
Attach the vertical linear trimmer.(NE3350)
For trimming, attach one of the attachment combs onto the
vertical linear trimmer.(NE3350)
Gently guide cutting unit to stray, unwanted hairs along the
eyebrow line or protruding from the eyebrow itself.
To remove the hairs completely, remove the attachment comb
and lower the trimmer onto the skin and move over desired
area.
Use slow and well-controlled movement.
TO REMOVE HAIR FROM EAR
Insert clipper’s cutting unit gently into the outer ear canal
opening.
Gently rotate clipper in a circular motion.
Avoid inserting the cutting unit more than 6mm into your
ear canal.
NOTE: Do not apply excessive pressure as this damages the
clipper head and may cause skin injury.
090793_REM_IFU_NE150-3350_22L.indd Gb2 090793_REM_IFU_NE150-3350_22L.indd Gb2 12.10.09 15:10 12.10.09 15:10