Remington R3150 - Manual (Page 8)

2
ENGLISH
CORDED USE
Plug power cord into shaver (Fig. A).
Plug power cord into wall outlet (Fig. B).
Slide power switch up to turn on (Fig. D).
Shave face and neck using short, circular strokes (Fig. E).
Slide power switch down to turn off (Fig. D).
The shaver adapts automatically to a mains voltage between 100V and 240V.
HOW TO USE
SHAVING
Switch the shaver on (Fig. D).
Use the trimmer to remove long hair first.
Hold the shaving head so all three heads touch your face simultaneously (Fig. D). The
independently floating heads will automatically adjust to the contours of your face.
Stretch the skin with your free hand so the hairs stand upright.
Only apply light pressure on the shaving head while shaving (pressing too hard can damage
the heads and make them vulnerable to breakage).
Use short, circular strokes.
TRIMMING
Push the trimmer button down (Fig. E).
Place trimmer at desired trim line for a quick, easy, professional trim. Hold the shaver as
shown in the illustration (Fig. F).
To retract and switch off the trimmer, push the trimmer lock button in and downwards
(Fig. G).
TIPS fOR bEST RESULTS
Ensure your skin is dry. Always hold the shaver at right angles to the skin so that all
three heads are touching the skin with equal pressure. Use moderate to slow stroking
movements. The use of short circular motions in stubborn areas may obtain a closer
shave, especially along the neck and chin line. DO NOT press hard against the skin
in order to avoid damage to the rotary heads.
CARE fOR yOUR SHAVER
Care for your product to ensure a long lasting performance. We recommend you
clean your shaver after each use. Using the brush supplied clean the internal parts of
the head assembly and shaver body. Always keep the protective cap on the shaving
head and keep the trimmer in the “off” position when the shaver is not in use.
090250_REM_IFU_R3130_22L.indd 2 14:58:15|01.05.09 Guido Krölls