Remington MB4040 - Manual (Page 6)

6
ENGLISH
C CARE FOR YOUR TRIMMER
Care for your trimmer to ensure a long lasting performance. Your trimmer is fitted with
high-quality, cutting blades that are permanently lubricated.
Cleaning should only be done with a soft brush.
E After each use
• Turn the appliance off.
• Gentle tap on a flat surface to remove hair particles, and brush the remaining hairs
away.
A CLEANING CAUTIONS
• Only the adjustable trimmer comb and cutter assembly may be removed from the
Trimmer for cleaning.
• Cleaning should only be done with a soft brush, such as the brush supplied with the
product.
• Only use the light-grade oil supplied or sewing machine oil on the blades.
• Do not use harsh or corrosive cleaners on the units or their cutters.
• This trimmer is not washable. Do not rinse under water.
• Do not submerge in water as damage will occur.
E TROUBLESHOOTING
, The trimmer does not work when turned on:
• Trimmer must be charged for a full 14-16 hours. If this does not work, contact
Remington® Service Centre.
, Trimmer blades does not move:
• The cutting unit may be dirty and clogged.
• Clean and lubricate the unit.
, Trimmer does not hold charge:
• Fully discharge battery by running trimmer until it stops then follow recharging
instructions.
• If time between recharging cycles does not increase, battery may need replacing.
Contact Remington® Service Centre.