Acnodes FES 2215 - Manual (Page 18)

10. USB 2.0 Ports
(4-pin USB 4,5) [refer to P.13, No. 11]
(4-pin USB6) [refer to P.13, No. 12]
11. System Panel Header (9-pin PANEL 1) [refer to P. 13, No. 15]
Connect the power switch, reset switch and system status indicator on the chassis to this
header according to the pin assignments below. Note the positive and negative pins before
connecting the cables.
- PWRBTN (Power Switch)
- RESET (Reset Switch)
- PLED (System Power LED)
- HDLED (Hard Drive Activity LED)