Acroprint Data Collection Terminal (ADCT) - Manual (Page 9)

9
Optionally, the terminal can also have an internal bar code reader.
The card is swiped through in the same fashion, but the Bar Code
should be on the left side of the card when swiped.
NOTE: For through-the-slot reading, Bar Code should be located
on card as shown.
Magnetic stripe -
right side
Bar Code - left side
1.00" Min.
0.25" Nominal
Operator interface
Card reader
The terminal has an internal magnetic stripe card reader. The
magnetic stripe on the card should be on the right side when the
card is swiped as shown below.