Setting the daylight saving time s, Setting the ending date of daylight saving time – Acroprint ES700 Electronic Time Recorder User Manual
Page 22
SETTING THE DAYLIGHT SAVING TIME
S
tep
1
S
tep
2
S
tep
3
S
tep
4
SETTING THE ENDING DATE OF DAYLIGHT SAVING TIME
Ex: Daylight saving time ends on Sunday, November 4, 2007.
Change the "Date"
Press the CHANGE button to set at
"4".
And then press the SET button.
After you finish setting the ending date
of D.S.T., press the SET button once
again.
Now the ending date of D.S.T. setting
has been completed. Replace the cover
and lock.
Important: Printing will not occur unless
Step 4 is completed.
Change the "Month"
Press the CHANGE button to set at
"11".
And then press the SET button.
At that moment, the flashing
changes from "Month" to "Date".
Change the "Year"
In case of the example, press the
CHANGE button to set at "07". And
then press the SET button.
At that moment, the flashing
changes from "Year" to "Month".
Press the SELECT button and position
the over the "D.S.T. END".
At that moment, the "Year" flashes.
D.S.T.
END
SELECT
CHANGE
SET
Year
Date
Month
D.S.T.
END
SELECT
CHANGE
SET
D.S.T.
END
SELECT
CHANGE
SET
D.S.T.
END
SELECT
CHANGE
SET
17