Acroprint ES700 Electronic Time Recorder - Manual (Page 24)

SETTING THE PASSWORD
S
tep
1
S
tep
2
S
tep
3
REGISTERING THE PASSWORD
When the password is set, you will be required to enter the password. If the password you
entered does not coincide with the setting, you cannot change the setting values.
You may select any 4-digit number from 0001 to 9998 as your password.
Note: "0000" and "9999" are not valid passwords.
After the password has been set, press
the SET button once more. The
password is now set. Replace the
cover and lock.
Important: Printing will not occur
unless Step 3 is completed.
Using the CHANGE button, select
"34" and press the SET button.
In case of the example, press the
CHANGE button to select "12", and
press the SET button. The flashing
changes to the last two digits.
Press the SELECT button and position
the mark at the "PASSWORD"
The first two digits flash.
Ex: Set the password to "1234"
PASSWORD
SELECT CHANGE SET
PASSWORD
SELECT CHANGE SET
PASSWORD
SELECT CHANGE SET
TU WE TH FR SA SU MO
19