ACS ACR100 SIMFlash (CCID) - Manual (Page 6)

4.0. Power Supply
The ACR100F requires a voltage of 5 V DC, 100 mA regulated power supply. It gets the power supply
from the PC.
4.1. Status LED
Bicolor LED in front of the reader indicates the activation status of the smart card and flash memory
interface.
GREEN LED:
Flashing slowly (turns on 200 ms for every 2 seconds)
Indicates smart card interface part is powered up and in the standby state. Either the smart
card has not been inserted or the smart card has not been powered up (if it is inserted).
Lighting up
Indicates the smart card power is switched on, i.e., the smart card is activated.
RED LED:
Lighting up
Indicates a communication between ACR100F and flash memory.
Document Title Here Document Title Here
Document Title Here [email protected]
www.acs.com.hk
Page 6 of 18
ACR100F (CCID) Reference Manual
Version 3.00
[email protected]
www.acs.com.hk