Air intake filter, Caution – Activeforever Invacare XPO2 Portable Oxygen Concentrator User Manual
Page 37
SECTION 7—CLEANING, CARE, AND MAINTENANCE
Part No 1148112
37
Air Intake Filter
CAUTION
DO NOT operate the XPO
2
without the air intake filter
installed.
NOTE: For this procedure, refer to FIGURE 7.1.
NOTE: Remove the air intake filter and clean it at least once each
week.
1. Lift filter cover slightly and pull down to remove tabs from
the grooves.
2. Lift out the filter.
3. Use a vacuum cleaner or wash with a mild liquid dish
detergent (such as Dawn™) and water. Rinse thoroughly.
4. Thoroughly dry the filter and inspect for fraying,
crumbling, tears and holes. Replace filter if any is found.
5. Reinstall the filter cover by placing the tabs in the slots and
engaging the magnet.
NOTE: Use only Invacare part number 1148281 as the air intake
filter for your XPO
2
.
Cover
Filter
Magnet
Cover
Tabs
Magnet
Grooves