Section 5- packaging, handling and set-up, Receiving, Unpacking – Activeforever Invacare Bariatric Electric Hospital Bed (Bariatric Home Care Hospital Bed) User Manual
Page 22: Unpacking bed ends, Section 5—packaging, handling and set-up, Receiving unpacking
SECTION 5—PACKAGING, HANDLING AND SET-UP
22
SECTION 5—PACKAGING,
HANDLING AND SET-UP
Receiving
1. Count cartons before signing shipping papers.
2. Designate someone at the facility to receive and inspect all merchandise. Use the
master order acknowledgment to check off items as they are received.
3. Compare the number of cartons shipped with the number of cartons actually received
and note such on the consignee copy of the freight bill. Make sure to have the truck
driver sign the copy acknowledging the count.
4. If shortage occurs, IMMEDIATELY contact Invacare Customer Service department at
(800) 333-6900.
Unpacking
The bed is contained in three cartons.
1. Check bed components for any obvious damage to the carton or its contents. If
damage is evident, contact your local Invacare dealer.
2. Remove any loose packing from the cartons.
3. Carefully remove all components from the cartons.
ƽ WARNING
DO NOT plug the power cord into a power source until assembly is complete. To
do so could result in damage or personal injury.
DO NOT attempt to operate bed controls prior to completion of assembly.
Otherwise, damage to bed components may occur.
Unpacking Bed Ends
NOTE: For this procedure, refer to FIGURE 5.1 on page 23.
1. The bed end carton includes:
• Two universal bed ends.
• Four casters (two locking and two non-locking casters).
• One drive shaft assembly in two pieces.