Activeforever PAL 1000 Portable Aquatic Pool Lift User Manual
Page 11
10
SPLASH! PRODUCT COMPONENTS
SEE PAGE 4 FOR COMPONENTS COMON TO ALL LIFTS
Splash! / Splash! Hi-Lo / Splash! HD / Splash! Mariner
Base Assembly Only
Base Assembly. The part of the Splash! that mounts to the pool deck or boat
dock. The Base Assembly is made up of several components as described
below:
Base Insert Stem. This piece slides into the anchor sleeve that is installed on
the pool deck or dock. The insert can either be round or square to adapt to the
designated sleeve.
Control Console Bracket. This tubular component bolts to the base assembly
and provides a mounting base for the control console.
Housing. ABS plastic covering to cover base assembly components from
weather. Needs to be in place prior to installing the mast assembly.
Attachment Cover. Slides down over housing to cover hardware (bolts and
washers).