Activeforever PAL 1000 Portable Aquatic Pool Lift User Manual
Page 19
18
6. Materials and Finish
PAL Only
Frame: Powder Coated Stainless Steel
Handle: Powder Coated Aluminum
Housing: Vacuum Formed ABS Plastic
Casters: Front Tente 8477 Precision Ball Bearing, Stainless Steel, 5”
total lock swivel
Rear: Tente 5328 Precision Ball Bearing, Stainless Steel, 5” fixed
Polyurethane Tread
Splash! Only
Base: Powder Coated Stainless Steel
Housing: Vacuum Formed ABS Plastic
All Units:
Arms: Powder Coated Aluminum
Mast: Powder Coated, Zinc Plated Steel
Seat Assembly:
Seat: Blow Molded Plastic
Frame: Powder Coated Stainless Steel
US Patent No. 5,790,995
PAL-Portable Aquatic Lift, the PAL logo, the Splash!, and the Splash! logo
are registered trademarks.
BATTERY CHARGING
The rechargeable battery should be cradled onto the charging unit when the lift is
not in use. A fully charged battery will provide approximately 30 lifting cycles,
depending on the weight of the users. The battery has
no memory, so it is not necessary to fully discharge
the battery prior to charging. Battery is fully charged
prior to shipping, but should be checked by looking
at LCD indicator on control unit prior to using to
insure charge level.
Green light indicates connection to power source. Orange light indicates battery is
charging. When battery is fully charged, orange light will go off. Set battery on charg-
er in a vertical position to insure good connection.