Activeforever Global Lift Rotational Series Reach R450R - Manual (Page 6)

Front of Anchor Sleeve must be 12” to 17” from the water’s edge
Optimal placement is 14”
Connect copper wire to the bonding lug and then to your bonding grid
Cold Pin’s should be ½” rebar 6” to 8” long
NOTE: Make sure your anchor sleeve is level and square with your pool’s edge.
COMPACT SAND
6”
3’
Concrete
Concrete
Cold Pin
Cold Pin
Water
Pool Wall
3’
3’
Anchor Sleeve
Overview
Section Detail
12” to 17” Distance From Water’s Edge (front edge of anchor sleeve)
SUPERIOR SERIES – SLEEVE ANCHORING SYSTEM
Bonding Lug
Anchor Sleeve
Actual application