Acura 2012 TSX Sport Wagon - Manual (Page 288)

286
uu Jump Starting u
Han
d
lin
g the U
n
expected
Once your vehicle’s engine has started, remove the jumper cables in the following
order.
1. Disconnect the jumper cable from your vehicle’s ground.
2. Disconnect the other end of the jumper cable from the assisting vehicle’s battery
- terminal.
3. Disconnect the jumper cable from your vehicle’s battery + terminal.
4. Disconnect the other end of the jumper cable from the assisting vehicle’s battery
+ terminal.
Have your vehicle inspected by a nearby service station or a dealer.
■ What to Do After the Engine Starts
2012 TSX5D-31TL7610.book 286 ページ ２０１１年７月１１日 月曜日 午前８時１０分