Acura 2013 RDX Navigation - Manual (Page 143)

142
Audio
Playing XM® Radio
Selecting XM Mode
1. Press the XM button.
 Press the XM button again, if necessary, to select the channel band (XM1,
XM2).
2. Select a channel using the Preset buttons and the bars (SKIP, TUNE, CATEGORY,
SCAN/A.SEL)
 The band and channel are displayed.
Audio Screen Control
H AUDIO button (in XM mode)
Control the audio system through the navigation screen.
1. Move e to select the channel band
(XM1, XM2).
2. Rotate i to select a preset
channel. Press u.
 Press and hold u until a beep
sounds to store the current
channel in a preset button.
 Move r to select AUDIO
MENU.
2 Audio Menu P. 143
1 Playing XM® Radio
d “Display audio screen”
You can control the radio using voice
commands.
2 Radio Commands P. 247
A visual guide helps you operate the audio
system.
2 System Controls P. 4
2 Basic Operation P. 6
In the channel mode, all available channels are
selectable. In the category mode, you can select
a channel within a category (Jazz, Rock, Classical,
etc.).
There may be instances when XM® Radio does
not broadcast all the data fields (artist name,
title). This does not indicate a problem with your
audio system.
You can store 12 XM stations in the preset
buttons. XM1 and XM2 let you store six stations
each.
XM® Radio display messages will be displayed
on the audio screen.
2 XM® Radio Display Messages P. 146
Channel band
Preset channels
RDX_KA-31TX4800.book Page 142 Monday, January 30, 2012 11:32 PM
QRG
2013 RDX Navigation