Acura 2010 MDX - Manual (Page 349)

1. Press and hold the SET button for
five seconds until the clock display
changes to
‘‘ZON ? N.’’ (Clock
adjustment mode will be started
after the first two seconds.)
2. Press the ▼ button. ‘‘ZON ? Y’’ will
be displayed.
3. Press the SET button. The zone
the compass is currently in will be
displayed.
4. Find the zone for your area on the
map.
5. If the zone is incorrect, press the
▼ button to cycle the count down,
or the ▲ button to cycle the count
up. Once the correct zone is
displayed, continue to step 6.
6. Press the SET button to set the
zone selection.
7. Press and hold the SET button for
about 5 seconds to exit the zone
selection and return display to
normal.
Compass
342