Acura 2010 MDX - Manual (Page 577)

2. Remove the towing hook and
wheel nut wrench located behind
the cargo area cover on the
driver's side.
3. Screw the towing hook into the
hole, and tighten it with the wheel
nut wrench.
To avoid damage to your vehicle, use
the towing hook for straight, flat
ground towing only. Do not tow at an
angle. The tow hook should not be used
to tow the vehicle onto a flat bed. Do
not use it as a tie down.
TOWING HOOK and
WHEEL NUT WRENCH
WHEEL NUT WRENCH
TOWING HOOK Front
If Your Vehicle Gets Stuck
570