Acura 2013 RDX User Manual
Page 86
Continued
85
uu
Gauges and Multi-Information Display
u
Multi-Information Display
In
strum
e
nt Pa
nel
Shows the total number of miles (U.S.) or kilometers (Canada) driven since the last
reset. Meters A and B can be used to measure two separate trips.
■
Resetting a trip meter
To reset a trip meter, display it, then press and hold the SEL/RESET button. The trip
meter is reset to 0.0.
Shows the outside temperature in Fahrenheit (U.S.) or Celsius (Canada).
■
Adjusting the outside temperature display
Adjust the temperature reading up to ±5°F or ±3°C if the temperature reading
seems incorrect.
Shows the estimated average fuel economy of each trip meter in mpg (U.S.) or l/100
km (Canada). The display is updated at set intervals. When a trip meter is reset, the
average fuel economy is also reset.
Shows the instant fuel economy as a bar graph in mpg (U.S.) or l/100 km (Canada).
■
Trip Meter
■
Outside Temperature
■
Average Fuel Economy
■
Instant Fuel Economy
1
Trip Meter
Switch between trip meter A and trip meter B by
pressing the SEL/RESET button.
1
Outside Temperature
The temperature sensor is in the front bumper.
Road heat and exhaust from another vehicle can
affect the temperature reading when your vehicle
speed is less than 19 mph (30 km/h).
It may take several minutes for the display to be
updated after the temperature reading has stabilized.
Use the multi-information display’s customized
features to correct the temperature.
1
Average Fuel Economy
You can change the way the average fuel economy is
reset.
2013 RDX
QRG
Index
TOC