ACU-RITE DRO 200T - Manual (Page 10)

DRO 200T Introduction
3
Lets you know when
you are setting a
preset or an absolute
zero.
Displays
At the top of the display window is a row of indicators. These tell you the current
state of the readout.
In addition to the lighted indicators along the top of the display, the top axis
display will scroll longer messages that will help you step through some of the
procedures.
MM DIA INCR ABS ZERO SET
Appears when you’re
positioning in metric,
dark when you’re
positioning in inches.
These tell you if the
position display is
incremental or absolute.
They also refer to the
type of preset.
Tells you when the
crossfeed axis is
displaying the part’s
diameter.
Appears when
setting an
absolute zero.