ACU-RITE DRO 200T - Manual (Page 22)

DRO 200T Readout Operations
15
Defining Tools with a Tool Presetter
Use a tool presetter to obtain offsets in X and Z for your tools.
If you wish, you may select a tool to be a reference tool. Then you can use a tool
presetter to obtain the differences, in X and Z, between the reference tool and the
other tools.
Then, select each tool and define its offset.
The reference tool does not
have to be Tool 0, and its
offset values do not have to
be 0,0
1 2 0
Z = 0
X = 0
DEFINE
ENTER
1 X +/- . 1 5
Z . 2 3
DEFINE
ENTER
2 X 1 . 6 5
Z . 2 3
USE
USE