Binatone KS-7030 - Manual (Page 5)

5
ENGLISH
Prevent water getting inside the appliance.
Do not use the scales or store them in places with high humidity or
where water could be spilled on them.
Store the appliance in the package, in a horizontal position.
Do not put foreign objects on the scales.
When cleaning the scales, do not use abrasive materials and
cleansers as these can damage the body and parts of the appli-
ance.
If you can’t turn on the appliance, check if the battery is in place
and set correctly. It is possible that the battery is discharged and
needs to be replaced. If replacement of the battery did not resolve
the problem, go to an authorized service center.
Keep the device closed, preferably in its package. Do not keep
foreign objects on the scale.
Do not use materials and means (for example, abrasive) during
the maintenance of the scale, which can damage its body and com-
ponents.
If you fail to turn on the device check availability of the battery
and its polarity. Possibly the battery discharged and should be
replaced. If the battery replacement did not result in positive result
please contact an authorized service center.
DESCRIPTION OF DEVICE
PARTS
Figure A:
1. Cradle
2. LCD-display
3. “On/Tare” button
4. “Mode” button
5. “Unit” button
6. Battery compartment
7. Kit for wall mounting
a) Fastening plate
b) 2 dowels
c) 2 screw nails
BEFORE THE FIRST USE
Remove all packaging materials before the first
use.
Remove the stud used for safe transportation
from the lateral side of the cradle (1) (Figure
B).
Find an appropriate place in the kitchen and
fasten the plate (7a) by means of the dowels
(7b) and screw nails (7c).
Take the device, open the battery compartment (6) and remove
the insulation sheet to clean contacts. Close the compartment.
Hang the scale on the fastening plate (7a).