Binatone SI-4040 - Manual (Page 5)

5
ENGLISH
SPECIAL SAFETY MEASURES
X Do not leave the iron unattended when it is
connected to a mains supply outlet. Always switch
the iron off even when you leave the room for
short periods of time.
X Do not leave the hot iron in a horizontal posi-
tion: place it upright on a heat resistant surface.
X The iron gets hot when in operation: any skin
contact with metal surfaces, vapor or water may result in burns.
X During operation of the appliance keep children away from it
especially when steam ironing.
X Never iron or steam iron articles being worn by a person.
X Avoid any contacts between the sole plate and plastic fittings
of an article: buttons, zippers, labels, etc.
X Always disconnect the iron from the mains when filling or drain-
ing the water tank.
X Store the iron in a vertical position to avoid damaging the sole
plate.
X The iron should always be connected to a grounded main
electricity supply.
DESCRIPTION OF
COMPONENTS
1. Casing
2. Non slip handle
3. Water inlet opening
4. Water tank cover
5. Water tank with maximum limit mark
6. Spray nozzle
7. Spray button
8. Burst of steam button (turbo steam, burst of steam in a vertical
position)
9. Steam control knob
10. Temperature control knob
11. Operation indicator
12. Iron sole plate
13. Power plug
14. Power cord
15. Measuring jug
16. Auto shut off indicator
17. Self clean button
BEFORE USING
X Remove all packaging from the appliance.
X Turn the steam control knob (9) into the “0”
position, and the temperature control knob (10)
– into the “Min” position.
X If you intend to iron with spray or steam,
push the cover (4) up and fill the tank (5) with
water through the opening (3). Use the mea-