Garmin nuvi 270 - Manual (Page 35)

nüvi 200 and 200W series owner’s manual 2
Appendix
Changing the Fuse
CaUTiOn: When replacing
the fuse, do not lose any of the
small pieces and make sure
they are put back in the proper
place.
If your unit will not charge in your
vehicle, you might need to replace
the fuse located at the tip of the
vehicle adapter.
1. Unscrew the
black, round
end piece,
and remove
it.
2. Remove the
fuse (glass
and silver cylinder), and
replace it with a 3 A fast-blow
fuse.
3. Ensure that the silver tip is
placed in the black end piece.
Screw on the black end piece.
Removing the nüvi
and Mount
To remove the nüvi from the cradle,
hold onto the cradle and tilt the nüvi
forward.
To remove the cradle from the
mount, turn the cradle to the right or
left. Apply pressure in that direction
until the cradle snaps off the mount.
To remove the suction cup mount
from the windshield, flip the lever
toward you. Pull the tab on the
suction cup toward you.
End
piece
Silver tip
Fuse
End
piece
Silver tip
Fuse