Garmin GPS V - Manual (Page 72)

62
2. Use the ROCKER KEYPAD to highlight ‘Anchor Drag’ and press ENTER. A pop-up
window will appear.
3. Use the ROCKER KEYPAD to highlight ‘On’ or ‘Off’ and press ENTER.
4. To defi ne the alarm distance, use the ROCKER KEYPAD to highlight the anchor
drag distance fi eld and press ENTER. Use the ROCKER KEYPAD and ENTER to
enter the maximum allowable drift distance.
To enable/disable the proximity alarm:
1. Follow the steps on page 54 to select the Alarms Setup Page.
2. Use the ROCKER KEYPAD to highlight ‘Proximity’ and press ENTER. A pop-up
window will appear.
3. Use the ROCKER KEYPAD to highlight ‘On’ or ‘Off’ and press ENTER.
4. To specify the proximity waypoint and alarm radius, use the ROCKER KEYPAD to
highlight the fi rst blank line under ‘Proximity Waypoints’ and press ENTER. Use
the ROCKER KEYPAD and ENTER to specify the waypoint category and waypoint
name. (Use the steps on pages 26-32 is you need more guidance.) With the proxim-
ity waypoint selected, highlight the ‘Radius’ fi eld adjacent to the waypoint name
and press ENTER. Use the ROCKER KEYPAD and ENTER to enter the alarm
radius.
5. To remove a proximity waypoint or all proximity waypoints from the list, use the
ROCKER KEYPAD to highlight the waypoint you wish to remove (not necessary
to remove all) and press MENU. Use the ROCKER KEYPAD to highlight ‘Remove
Waypoint’ or ‘Remove All’ and press ENTER.
Main Menu: Setup: Language
The Language Setup Page allows selection of Dutch, French, German, Italian, or
Main Menu: Setup
Proximity waypoints allow you to mark locations
you wish to avoid.
The GPS V has a variety of interface settings
for connection to other equipment.
Language options allow user friendly display.
Reference
GPS V OM.indd 62 5/7/2003, 8:53:34 AM