Garmin NavTalk GSM - Manual (Page 73)

63
Section 3
Phone Operation
Call Services
Call Waiting Options Menu
Call Waiting Activation Page
Call Waiting Page
Using Call Waiting
1. Highlight ‘Call Services’ from the Main Menu ‘Settings’ tab and press
ENTER to display the tabbed Call Services Pages.
2. Use the ARROW key to highlight the ‘Call Waiting’ tab and then press
ENTER to display the Call Waiting Page.
3. Use the ARROW key to highlight ‘All incoming calls’. A “Select this to notify of
all incoming calls” message will appear at the bottom of the page.
4. Press ENTER to pop-up the menu. Highlight ‘Activate’, ‘Cancel’, or
‘Check Status’ and then press ENTER to confi rm.
5. An activation page will appear if you selected ‘Activate’. This page will
cycle off when the activation message has been received by your service
provider. Press CANCEL to stop activation before the page cycles off.
NvTlkGSMManual copy.indd 63 12/2/2002, 8:42:52 AM