Garmin NavTalk GSM - Manual (Page 87)

77
Section 4
GPS Navigation
Find ‘n Go
You can locate Waypoints, Cities, and Interstate Exits which are
included in the unit basemap. You can also locate Cities, Exits, Points of
Interest, Addresses and Junctions when using MapSource MetroGuide or
MapSource Points of Interest mapping data. If this data is not present,
these options are not available and will appear gray.
Your current location is normally used as the reference point for the
‘Nearest’, ‘Distance’, and ‘Direction’ features. However, if you are using the
panning arrow (Map Pointer), it is used as the reference point. The Find
Menu will state either “Using Current Location” or “ Using Map Pointer”
depending on which reference point is used.
Using ‘By Name’ and ‘Nearest’ Lists
All items on Find Menu option lists can be viewed in two formats, ‘By
Name’ (a list of every item available for a category) or by ‘Nearest’ (a list of
only those items for a category that are nearby). The ‘Nearest’ option pres-
ents you with a much smaller list of items and speeds the selection process.
To switch back and forth between Find ‘By Name’ and by ‘Nearest,,
press the MENU key to display the Options Menu for that category page.
All map items found using the Find ‘n Go feature can be marked as a
waypoint when selecting the ‘Save as Waypoint’ option accessed by press-
ing the MENU key when the information page for an item is displayed.
Find ‘n Go
Find Menu
GPS Tab - Find ‘n Go Page
Section 4
NvTlkGSMManual copy.indd 77 12/2/2002, 8:43:04 AM