Garmin GPS 95STD - Manual (Page 39)

5-9
*Press alphanumeric and
arrow keys, as needed, to
select desired identifier
Press the “3” key, followed by the left
arrow key to select the letter “G”.
Press the “1” key followed by the left
arrow key, to select the letter “A”.
Continue pressing the desired
alphanumeric keys and, if needed, the
arrow keys to enter the “GARMIN”
waypoint. Press ENT when complete.
(NOTE: If the GARMIN waypoint is
not in memory its coordinates must be
entered to initialize the GPS 95 to that
location. Select the Present Position
Page and enter the coordinates for
GARMIN [N 38° 57.003' W 94°
44.767'].)
The cursor is over the reference
bearing. Since the simulation will begin
at GARMIN you do not need to define
a reference bearing from this point.
Press ENT.
The cursor is over the reference
distance. Enter a distance of zero and
press ENT. The initial position is now
set at the GARMIN waypoint.
You can view your position coordinates
by pressing NAV and the POSN
softkey, if needed. The Present
Position Page is displayed.
NAV
ENT
ENT
0
ENT
*Plus POSN softkey
if needed
GHI
3
ABC
1