Garmin GPS 95STD - Manual (Page 99)

C-6
The yoke mount is designed to allow the GPS 95 to be installed either with
or without the battery pack attached.
To adjust the yoke mount to accept the GPS 95 with the battery pack
attached...
· Loosen the coinslot screw.
· Lower the cradle to its lowest position.
· Tighten the coinslot screw. When adjusted properly, the coinslot
screw should fit completely into the counterbore in the cradle so that
all surfaces are flush.
C.4 YOKE MOUNT OPERATION
The yoke mount has been designed for easy insertion and removal of your
GPS 95 if you wish to use the unit in another airplane or vehicle, to plan at
home, or to prevent theft.