Garmin GPSMAP 162 - Manual (Page 55)

46
Reference
Going to a Destination
To turn proximity alarms on or off:
1. Use the ARROW KEYPAD to highlight the fi eld below “Proximity Alarm” and press
ENTER/MARK.
2. Select the desired ‘ON’ or ‘OFF’ setting and press ENTER/MARK.
To clear one or all proximity waypoint(s) from the list:
1. Use the ARROW KEYPAD to highlight the proximity waypoint to clear and then press the MENU
key.
2. To clear a single alarm, highlight the ‘Clear Alarm’ fi eld and press ENTER/MARK.
3. To clear all proximity waypoints, select the ‘Clear All’ option and press ENTER/MARK.
4. Use the ARROW KEYPAD to highlight the ‘OK’ prompt and press ENTER/MARK to confi rm.
Going to a Destination
Using the NAV/MOB key, the GPSMAP 162 provides four ways to navigate to a destination: Go To
Waypoint, Follow Track (TracBack), MOB (Man OverBoard), and Follow Route navigation. Once you
are actively navigating, you will see a straight line that always runs from the point where you started the
GOTO, to the destination. The easiest method for selecting a destination is the ‘Go To’ function, which
lets you select a destination waypoint and quickly sets a direct course from your present position.
If you have a waypoint highlighted on a list or the map, ‘Go To <waypoint name>’ will appear in
addition to ‘Go To Waypoint’. The ‘Go To’ function can be accessed from a list of waypoints or
graphically from the map display.
A dashed circle will appear showing
the alert boundary for the proximity
waypoints.
Proximity Circle Proximity Waypoint